Micropac® PSP 2 Speed Hand Pump Configurator

Name: Micropac® PSP 2 Speed Hand Pump Configurator - PumpShop Pro
Price: 1253.66 GBP
Availability: InStock

Pump Model

Custom 2 speed hand pumps to your exact requirements

PSP alloy and steel 2 speed hydraulic hand pumps for applications including high pressure testing, hydrostatic leak testing, filling & charging, manual over-ride/shutdown systems and more pressure tests. Suitable for marine, aerospace, process engineering, oil & gas and other industries, with models up to 1000bar. Will retrofit in place of other industry offerings,

Use the configurator below to get an instant price for hydraulic two speed hand pumps and order today. Select from the following:

Displacement of Pump / Maximum Pressure
Length of operating handle
Seal material
Test Fluid
Release valve
Pressure Gauge
Relief Valve
Reservoir

Displacement of Pump / Maximum Pressure*

Your choice of displacement for the hydraulic hand pump is based on:

How much fluid do you need to move? A bigger displacement moves more fluid every time you move the handle.
How much pressure do you need? A smaller displacement allows you to reach higher maximum pressures.

The 2 speed operation of this hydraulic hand pump means that on low pressure mode, the pump will move 51cc/stroke, up to a maximum pressure of 50bar.

Choose from 6 options for high pressure mode to best suit your application.

110 bar maximum | 1,600psi | 20.5cc/stroke170 bar maximum | 2,500psi | 13.1cc/stroke310 bar maximum | 4,500psi | 7.3cc/stroke450 bar maximum | 6,500psi | 5.1cc/stroke700 bar maximum | 10,000psi | 3.3cc/stroke1000 bar maximum | 15,000psi | 2.2cc/stroke

Length of operating handle*

The 304 stainless steel handle is detachable and comes with a PVC grip.

The longer the handle, the easier the pump will be to operate at maximum pressure.

We suggest if you are regularly using the pump beyond 50% of the maximum pressure stated, that you pick the longer 625mm handle.

450mm Handle+£18.17625mm Handle+£21.85No handle

Seal material*

The standard offering on our hydraulic hand pumps is Nitrile / Buna N, but we can also fit "Viton" Fluorocarbon, or EPDM, Peroxide cured. Other seal options are available as a special, but please contact us.

The seal compound used must be compatible with your desired operating fluid, and temperature range. If in doubt, contact us and we can help.

Nitrile / Buna N"Viton" Fluorocarbon+£30.89EPDM Peroxide Cured+£30.89

Test Fluid*

Pick a test fluid that we will test your hand pump with, prior to sending the unit to you. Standard options would be Water or Mineral Oil.

WaterMineral OilSkydrol (Must use EPDM Peroxide Cured Seals above)

Release valve*

An optional release valve to vent pressure back to the hydraulic reservoir/pump body when opened.

Not fittedFitted Release Valve+£98.15

Pressure Gauge*

Our gauges are constructed from 316 stainless steel wetted parts, with a 304 stainless case and plastic window. The gauge has a dual scale showing Bar and PSI pressure readings, and is 100mm in diameter.

No Gauge fittedGauge fitted (to suit max pressure of pump)+£177.49

Relief Valve*

A reliable way to limit how much pressure can be produced on the pump.

Please note; our relief valve is not PED certified and is fitted before the outlet non-return valve, so will only protect the hydraulic hand pump and not vent over pressure in your system.

Not fittedFitted Relief Valve+£69.06

Reservoir*

Our PSP reservoir has a capacity of 15L, with a removable lid and carry handle for portable operation. It also has a long foot bar for stability while pumping. The hand pump reservoir is constructed from 316 stainless steel.

15L reservoir fittedNo reservoir needed-£391.01

Total:

Micropac® PSP 2 Speed Hand Pump Configurator

CALL

EMAIL

VISIT

SUPPORT