MT Cartridge Hand Pump for Ifor Williams Trailers P119716

£139.99 + VAT

Product Details

C10-2 Hydraulic Cartridge Hand Pumps

Hydraulic Cartridge Hand Pumps offer very quick screw-in fitting into a standard SAE10 C10-2 manifold cartridge valve cavity. This cavity is simply machined into a manifold block using a form cutter and tapped 7/8UNF. The tank connection is on the nose and the pressure connection enters from the side. Our cartridge pumps are very compact, good value and flexible to match your application. Contact us for other models including the 8cc & 11cc pump models and also stainless units for harsh environments.

Although this pump can be used on any C10-2 cavity, this model is also used specifically on Ifor Williams Trailers; Fitted on TT85 Tipping trailers pre 10/12/2006 & TT105 & TT126 Tipping Trailers pre 19/03/2007. If you need a replacement hand pump for your trailer, this is a suitable replacement.

Why buy a Micropac MT Cartridge Hand Pump?

Industry standard manifold mounting for easy design and common tooling
Cost effective hydraulic solution for manual power on OEM installation
Wide range of applications
Corrosion resistant stainless steel options for demanding environments
“Two minute fitting”
Swivel handle pivot for neat parking and easy pumping

Why buy a Micropac MT Cartridge Hand Pump?

  • Industry standard manifold mounting for easy design and common tooling
  • Cost effective hydraulic solution for manual power on OEM installation
  • Wide range of applications
  • Corrosion resistant stainless steel options for demanding environments
  • “Two minute fitting”
  • Swivel handle pivot for neat parking and easy pumping

Description

The Micropac MT pump offers a rugged and cost effective industry standard C10-2 cartridge hand pump suitable for manifold mounting. A range of displacements and materials are offered to suit a wide range of applications. Displacements range from 5.6cc per stroke up to 12cc per stroke and pressures between 1 – 250 bar.

All units fit in the C10-2 7/8 UNF cavity with the tank connection on the nose. The handle is detachable and is mounted on a 360 degree swivel. All pumps include an inlet check valve, an outlet check valve and a strainer. A cost effective carbon steel model is standard, but alloy and 303 or 316 stainless steel versions are also available for increased corrosion resistance in more demanding environments.

Mounting manifold blocks are also available as an alternative to using your own manifold.

The Micropac MT pump offers a rugged and cost effective industry standard C10-2 cartridge hand pump suitable for manifold mounting. A range of displacements and materials are offered to suit a wide range of applications. Displacements range from 5.6cc per stroke up to 12cc per stroke and pressures between 1 – 250 bar.

All units fit in the C10-2 7/8 UNF cavity with the tank connection on the nose. The handle is detachable and is mounted on a 360 degree swivel. All pumps include an inlet check valve, an outlet check valve and a strainer. A cost effective carbon steel model is standard, but alloy and 303 or 316 stainless steel versions are also available for increased corrosion resistance in more demanding environments.

Mounting manifold blocks are also available as an alternative to using your own manifold.

Technical Specifications

Pressure 1–250 bar
Stroke volume 5.6cc
Manifold C10-2, 7/8 inch UNF
Materials Carbon steel and alloy. 303 stainless steel / 316 stainless steel available – contact us
Seal materials Nitrile and Polyurethane
Fluid options Mineral oil is standard, contact us for more options

Share this product with your friends...